FREEZE WARNING: DO NOT ALLOW PRODUCT TO FREEZE. FREEZING WILL SOLIDIFY AND RUIN PRODUCT. WE SUGGEST OVERNIGHT SHIPPING DURING FREEZING WEATHER!
Now available in 11 natural colors and 3 adjuster colors! NecroPAX™ can completely cover any discoloration and will NOT rub off. It is not a "standard" cosmetic foundation, though many use it as such, but a special opaque restoration base that conceals ANY discoloration, seals, and, when properly applied, will NOT rub off. Dries to a matte finish. Specially formulated to adhere to deceased tissue. NecroPAX™ can block discolorations, abrasions, tattoos, etc. as it seals. No neutralizers, correctors, or additional concealers needed. Apply regular NecroPAX with a cosmetic wedge sponge in very light coats. Easily blend edges by feathering. Allow to dry between coats. A hairdryer set on the COOL seting will speed drying. Three to four very light coats will cover any discoloration while not looking "caked on". We use and highly reccomend the Paasch H Series single action airbrush for airbrushing NecroPAX™. Also, For airbrushingNecroPAX™, a compressor capable of at least 25 psi pressure will be needed. We reccomend the Paasche DC600R or the Iwata Smart Jet Pro. Clean airbrush immediately after use with acetone. DO NOT allow NecroPAX to dry in airbrush. All shades may be intermixed to create your perfect color. NecroPAX™ is used mainly as a full coverage sealing base, acting as a "second skin". Any type of makup; airbrush, water based, or alcohol based, etc. can be applied over NecroPAX™, if desired, to "fine tune" the foundation color. Be sure to powder when finished with complete complete work to remove any tackiness. Available in eleven matte shades and three matte adjuster shades. 1/2 oz., 1 oz., 2 oz., and 4 oz. bottles. Watch video above to see sponge application techniqe.
TIP: An application of Green Marble Sealer after NecroPAX dries is a great way to add a bit of "depth" to the cosmetic. Once dry it is not shiny.